DESCRIPTION
QIS YAPIMAX is a
high-strength, polymer-modified cement-based adhesive mortar used for bonding thermal insulation boards (XPS, EPS) .
AREAS OF USAGE

It is used for bonding heat plates in sheathing works
.
PROPERTIES
✔It can be easily prepared and
applied by mixing with water .
✔It does not crack or sag.
✔It provides good adhesion.
✔It is resistant to external effects and frost.
✔It is impermeable.
✔It is impact resistant.

APPLICATION
Surface Preparation The surface on which the
✔thermal insulation board will be attached
must be solid and clean .
✔Surface repairs should be made 24 hours in advance, oil, paint, dust,
The surface
must be completely cleared of substances that will prevent the mortar from sticking, such as curing .
✔The surface should be saturated with water before application, and
precautions should be taken on absorbent surfaces .
✔The surface of the insulation board
must be clean, dry and free of sticking agents.
Mixing
✔25 kg of powder material
is added to 6.25 – 6.50 kg of water depending on the ambient temperature . (water rate ~ 25%)
✔Required amount of water is put into a clean bucket.
✔The required powder product is added on it
and mixed with a mixer until a homogeneous and lump-free mortar is obtained.
✔After the material is rested for 5 minutes, it
is mixed for 30 seconds and the application is started.
✔The amount of mortar to be used within 30-60 minutes should be made.